21.03.2011
MAP-Förderung: Heiße Luft?
Wie bereits im letzten DGS-Newsletter berichtet, wurden zum 15. März die Förderkriterien, sprich die geforderte Jahresarbeitszahlen (JAZ) bei Wärmepumpen, abgesenkt. Die Folge: Auch ineffiziente Luft-Wärmepumpen erhalten wieder öfter einen Förderbonus. Diese Anpassung wurde vor allem von Seiten des Bundesverbands Wärmepumpe (BWP) angeschoben. So schreibt dieser auch: „Die intensiven Bemühungen des BWP haben sich gelohnt: Das Bundesumweltministerium (BMU) hat eine Änderung der Förderrichtlinie für Wärmepumpen im Marktanreizprogramm (MAP) beschlossen, durch die sich die Förderbedingungen für Wärmepumpen erheblich verbessert haben“. Von Seiten des BMU heißt es lapidar: „Die technischen Förderanforderungen wurden überarbeitet. Die geforderten Jahresarbeitszahlen wurden abgesenkt, die Förderung für Wärmepumpen wird auf einen anderen Bemessungsmaßstab umgestellt“.
Die Hintergründe, die zu der Novellierung führen, liegen wohl weniger an einem besseren Wirkungsgrad in der Stromproduktion. Hinter vorgehaltener Hand kann man ganz andere Argumente vernehmen, weshalb die JAZ abgesenkt werden musste. Zum einen ist die Differenz zwischen den geforderten und den erreichten Werten einfach zu groß, was in der Kommunikation mit dem Kunden zu Problemen führte. Zum anderen war der Anteil der geförderten Luft-Wärmepumpen einfach zu gering, zu viele der eingebauten Anlagen wurden ohne Förderung installiert. In der Realität (siehe auch „Die Energieeffizienz von Wärmepumpen“ in diesem Newsletter bzw. hier) sieht es leider so aus, dass aufgrund mangelnder oder gar fehlender Energieeffizienz gerade mal knapp 10% der in einem Praxistest untersuchten 50 Wärmepumpen die staatliche Förderung verdient hätten. Einer Förderung, die ja bekanntlich aus Steuergeldern gespeist wird. Im dem Test wurden insgesamt 20 Luft-Wärmepumpen untersucht, eine einzige übertraf die inzwischen abgesenkte JAZ von 3,5.
Möglichkeiten und Grenzen der Wärmepumpentechnik
Unter der Rubrik DGS-Aktuell finden Sie hier einen ausführlichen Text zu der Absenkung der Jahresarbeitszahl bei Luft-Wasser-Wärmepumpen.
Matthias Hüttmann
21.03.2011
RAL Bestandteil des Münchner Qualitätsstandard 3.0
Die neue Förderzielsetzung heißt Qualität: Die Landeshauptstadt München empfiehlt die Anwendung des Münchner Qualitätsstandards, um damit bei baulichen Maßnahmen eine größtmögliche Einsparung an Energie zu erreichen. Ziel des Programms ist es, mit den verfügbaren städtischen Mitteln möglichst große Energiespar-Effekte zu erreichen. Gleichzeitig soll ein Anstoß zu einer qualitativ hochwertigen Umsetzung von Energiesparmaßnahmen gegeben werden. Ein Bestandteil dieses Qualitätsstandards ist das Abnahmeprotokoll nach RAL für Solaranlagen.
Zum Nachweis der für die Förderung aus dem Münchner Förderprogramm Energieeinsparung (FES) erforderlichen Qualitätsmerkmale ist die Erfüllung aller Anforderungen erforderlich, die in den Unterlagen zum Münchner Qualitätsstandard beschrieben sind. Als Fördervoraussetzung sind zusätzlich, auch bei Nichtwohngebäuden, die allgemeinen und maßnahmenspezifischen Anforderungen des Münchner Qualitätsstandards zu erfüllen. Diese sind in der Broschüre „Münchner Qualitätsstandard zum Sanieren und Bauen in Wohngebäuden“ beschrieben.
Gefördert wird der Einbau thermischer Solaranlagen zur Warmwasserbereitung und zur Heizungsunterstützung. Solaranlagen die, auch teilweise, der Schwimmbadwasser- Heizung dienen sind von der Förderung ausgeschlossen. Anlagen mit Langzeitspeichern und Luftkollektoranlagen können auch als Sondermaßnahmen gefördert werden. Bei den Maßnahmen zur Nutzung der Solarenergie gilt eine Bindefrist. Thermische Solaranlagen, die aus dem Förderprogramm Energieeinsparung gefordert wurden, sind mindestens 5 Jahre zu betreiben. Werden aus dem Förderprogramm Energieeinsparung geforderte Anlagen vor Ablauf dieser Frist abgebaut oder au.er Funktion gesetzt sind die gewährten Zuschüsse anteilig zurückzuzahlen.
21.03.2011
Veranstaltungstipp: Unternehmerforum Elektro-Mobilität
Elektro-Autos: Sie beschleunigen in fünf Sekunden von Null auf 50 Kilometer und schaffen eine Reichweite bis zu 140 Kilometer. Die Vorteile der praxiserprobten Mini-Elektro-Autos lassen bereits jetzt aufhorchen: Hohen Anschaffungskosten stehen relativ geringe Unterhaltskosten gegenüber: günstige Versicherung, langjährige Steuerfreiheit, und niedrige Betriebskosten. Weitere Vorteile sind weniger Lärm, keine Abgase, kein Motorenöl sowie Langlebigkeit. Im optimalen Fall befindet sich die Solarstromanlage direkt auf dem Parkplatz, wo das Fahrzeug steht.
Geht es nach dem Willen der Bundesregierung sollen hierzulande bis 2020 eine Million Elektroautos fahren. Deutschland soll damit zum „Leitmarkt und Leitanbieter“ werden. Bei der Umsetzung dieses erklärten Zieles spielt das Handwerk eine bedeutende Rolle als Servicepartner. Beim Unternehmerforum "Elektro-Mobilität "Die Zukunft ist elektrisch"" informieren Experten kompakt und praxisbezogen über Chancen und Konsequenzen der Elektromobilität. Zudem werden praxiserprobte Fahrzeuge präsentiert.
Die Veranstaltung der Handwerkskammer für Mittelfranken findet an zwei Terminen statt. Der Vorsitzende des DGS-Fachausschusses Solare Mobilität, Tomi Engel hält auf dem Unternehensforum jeweils einem Vortrag mit dem Titel "Rahmenbedingungen: Technik und Politik". Das Referentenhonorar für Herrn Engel trägt der Landesverband Franken der DGS.
Termine:
Freitag, 1. April 2011, Freitag, 15. April 2011
Bildungszentrum (BZ) 2, Sieboldstraße 9, 90411 Nürnberg
jeweils von 13.30 bis 17.30 Uhr
Die Veranstaltung ist für Mitgliedsbetriebe und Existenzgründer kostenfrei, um Anmeldung wird gebeten:
21.03.2011
SONNENENERGIE 2/2011: Die Energieeffizienz von Wärmepumpen
Praxistest: drei Kompakt-Luft-Wärmepumpen mit kontrollierter Wohnraumlüftung, Wärmerückgewinnung und Warmwasserbereitung
Einführung und Aufgabenstellung: Im Hinblick auf die zunehmenden Anforderungen an den Klimaschutz arbeiten zur Zeit viele Firmen daran, die nur mäßigen bis fehlenden Energieeffizienzen von Luft-Wärmepumpen zu verbessern. Die Gründe für den Leistungsmangel liegen in einer nicht-optimalen Auslegung, unzureichender Anpassung der Kaltquellen und Wärmesenken an die Wärmepumpe und deren nicht fachgerechter Einbau und Betrieb; näheres dazu auf den Seiten 18, 19 und 30 des Schlussberichtes der Phase 1 des „Feldtests Wärmepumpen“ [1]. Mit neuerer Technik und verbessertem Fachwissen könnte es jedoch gelingen, die Jahresarbeitszahl auch von Luft-Wärmepumpen auf über JAZ = 3,0 anzuheben, um sie aus Sicht der Deutschen Energieagentur und des Rheinisch-Westfälischen Elektrizitätswerkes als „energieeffizient“ bezeichnen zu können (siehe Infokasten „Jahresarbeitszahl“).
Ob und gegebenenfalls in welchem Maße noch Energieeffizienzsteigerungen möglich sind, hat die Lokale Agenda 21 – Gruppe Energie der Stadt Lahr (Schwarzwald) im Rahmen der Phase 2 „Innovative Wärmepumpensysteme“ des „Feldtests Wärmepumpen“ an einer Kompakt-Luft-Wärmepumpen am Oberrhein untersucht. Der Hersteller bewirbt sie als ein „Heizsystem, bei dem noch viel Luft drin ist“, das besonders für Niedrigenergiehäuser geeignet sei und umweltfreundlich arbeite. Und das lokale Elektrizitätswerk behauptete in seiner Kundenzeitschrift, dieses Heizsystem „schont die Umwelt, spart Geld und Energie“. Darüber hinaus attestierte der Stromversorger einem solchen Wärmepumpensystem anlässlich einer VDI-Podiumsdiskussion in Lahr ein hohes Energieeinsparpotential.
Solche Vorschusslorbeeren machen natürlich neugierig. In der Tat: Der Charme der Kompakt-Luft-Wärmepumpe besteht darin, dass sich Heizung und kontrollierte Lüftung sowie die Warmwasserbereitung mit nur geringem Aufwand verbinden lassen.
siehe auch:
Nicht jede Wärmepumpe trägt zum Klimaschutz bei
Klimafreund Wärmepumpe? Luft/Luft-WP im Passivhaus
Warmwasser-Wärmepumpen auf dem Prüfstand
21.03.2011
SONNENENERGIE 2/2011: Wacht der schlafende Riese noch mal auf?
Wann emanzipiert sich die Solarwärme und wird zum Technologietreiber im Heizungsbau: Das Jahr 2010 war für die Solarwärmebranche enttäuschend. Nach Angaben des Bundesverbands Solarwirtschaft (BSW) verzeichnete die Marktentwicklung ein Minus von 26 Prozent. Damit schrumpft der Solarwärmemarkt, übrigens auch in Europa, zum zweiten Mal in Folge. Branchenvertreter weisen in diesem Zusammenhang auf die mehrere Wochen andauernde Fördermittelsperre durch die Bundesregierung hin. Das Bundesamt für Wirtschaft und Ausfuhrkontrolle (BAFA) bestätigt einen drastischen Rückgang der Antragszahlen für Solarkollektoranlagen im Jahr 2010, der sich bereits seit dem Sommer abgezeichnet habe. Nach insgesamt 157.495 Förderanträgen im Jahr 2009 wurden bis zum 17. Dezember 2010 nur 50.970 Anträge gestellt. DieFördertöpfe seien nicht ausgeschöpft worden.
Der Anteil der Kollektoranlagen, die auch der Raumheizung dienen, betrug 2009 mit 79.520 rund 50 Prozent. Nach Erhebungen der Branchenverbände BSW und BDH, die sich vor allem auf die Art der verkauften Solarspeicher beziehen, sei der Anteil der heizungsunterstützenden Solaranlagen in 2010 sogar zurückgegangen. Dass die Lage mancher Hersteller nicht gerade rosig aussieht, bestätigen Meldungen über Personalabbau und erste Insolvenzanträge. Auch wenn der BSW „vor dem Hintergrund steigender Heizkosten und eines hohen Sanierungsbedarfs eine Marktbelebung für 2011“ erwartet, steht die Frage im Raum, ob man von struktureller Krise sprechen muss oder ob der schwarze Peter bei der Bundesregierung zu suchen ist.
Photovoltaik steht im Rampenlicht
Im Gegensatz zur Solarwärme ist die Photovoltaik erfolgreich und in aller Munde. Sie gilt technologisch als eine Art Flagschiff der Erneuerbaren und ist in den Augen der Öffentlichkeit Synonym für Solaranlagen. Wie konnte es kommen, dass die Solarthermie in die Lage des kleinen Bruders geriet, der inzwischen auch noch kränkelt? Und das, obwohl die energetische Ausbeute von einem Quadratmeter Kollektorfläche um ein Vielfaches höher liegt als bei einem Quadratmeter Solarzellen.
Um die unterschiedlichen Entwicklungen beider Sparten besser verstehen zu können, werfen wir einen Blick auf die Prozesskette, welche die Hersteller und Investoren verbindet. Bei PV stellt sich diese einfach und leicht verständlich dar. Sie beginnt mit der Produktherstellung, geht über das Aufstellen und Anschließen zum Einspeisen und endet mit der Vergütung. Diese wurde klar geregelt und funktioniert seither.
Bei der Solarthermie ist es komplizierter: Produzieren und Aufstellen mögen ja noch vergleichbare Vorgänge sein, aber beim Anschließen und Einspeisen stellt sich die große Frage nach dem Wie. Die Vielfalt der möglichen Kombinationen mit anderen Energieträgern stellt in anlagentechnischer wie betriebswirtschaftlicher Hinsicht eine große Herausforderung dar. Dass bei der Solarthermie keine ähnlich überzeugende Regelung wie das EEG zur Unterstützung der Markteinführung zustande gekommen ist, dürfte hier seine tiefere Ursache haben.
siehe auch: Solarwärme-Renditen